Composite veneers (also called "hybrid veneers") are laminate veneers for natural teeth. They consist of composite/composite resins (resin matrix with porcelain filler particles). The first attempts were undertaken in the 1930s (at that time without the adhesive technique).
Composite veneers share various features with porcelain veneers:
They are mainly used for aesthetic purposes. The appearance of a tooth is adapted to harmonise better with the other teeth. This includes, e.g. masking discolorations or structure anomalies of the tooth structure, correction of shape deviations (shortening, elongation, diminutive forms), malpositioning (rotation, tipping), addition of missing tooth structure (e.g. due to attrition or erosion) and closure of small gaps (diastemas). Another objective may be the temporary or permanent adjustment of the occlusal guidance (e.g. at the canines) and/or bite (bite raising).
Preparation (often after preparatory stages such as mock-up, wax-up, fabrication of try-in veneers, templates, groove cutting) is minimally invasive; veneers are generally thin (minimum 0.3 mm to maximum approx. 1 mm). In contrast to a crown, large areas of the tooth structures are preserved. In anterior teeth veneers always cover the vestibular surface (with or without incisal edge coverage); in the posterior region they generally also cover part of or the entire occlusal surface. Following try-in (if necessary with try-in pastes for optical bridging of the cement gap) the veneer is usually luted adhesively using transparent or whitish, long-term, shade-stable composite cements.
Unlike porcelain veneers, cost-effective composite veneers can also be fabricated directly intraorally (also for temporary restorations). They are not as hard and consequently less wear-resistant, but this also helps them adapt more easily to individual patient conditions. Composite veneers exhibit a higher tendency to plaque accumulation and discoloration. These material-related differences decrease with newer composite materials ("polymer porcelain"). Composite veneers can be repaired intraorally.
In addition to fabrication (using the build-up technique) of composite veneers, sometimes directly on the tooth but mainly custom-fabricated indirectly in the laboratory after impression-taking and model fabrication, systems with prefabricated composite veneers are available. These systems comprise a range of "blanks" for reproducing several versions of the individual tooth types. After respective pre-selection and minimally invasive preparation or without any preparation ("non-prep veneers"), these industrially manufactured homogeneous, surface-hardened composite veneers are customised by trimming and the addition of special composite materials before being luted adhesively.
The service life of composite veneers should exceed six years.
Von uns erhalten Sie professionelle Unterstützung.
Treten Sie mit uns in Kontakt oder nutzen Sie unser Kontaktformular.
Deutsch | Englisch |
---|---|
Epoxydharz | epoxy resin |
Implantat-Suprakonstruktionen Implantat-Suprakonstruktionen Ober- und Unterkiefertotalprothese (Unterseite, mit Kugelkopfmatrizen)
Kugelkopf Eine S. kann rein implantatgetragen sein oder sich sowohl auf Zähnen, als auch auf Implantaten abstützen. Insbesondere bei Brücken spricht man dann von Hybrid- oder Verbund-Zahnersatz. Metallkeramikkronen auf Implantaten Bei zementierten S. ist zwischen provisorischer (temporärer), definitiver (permanenter) und semi-permanenter Zementierung zu unterscheiden. Letztere soll eine sichere Befestigung und gleichzeitig das Abnehmen der S. durch den Zahnarzt im Bedarfsfall ermöglichen. Damit handelt es sich um eine sogenannte bedingt abnehmbare (für den Patienten also festsitzende) S. Dazu gehören auch die verschraubten S. Die beiden Befestigungsarten bieten Vor- und Nachteile: Verschraubungen bedingen Spalträume, die bakteriell besiedelt werden können, zur Vorbeugung dagegen werden spezielle Gele zum Einbringen in den Implantat-Innenraum angeboten, die langfristig wirksam bleiben sollen. Erfolgt eine Fixation von S. mit Schrauben, können bei diesen auch Misserfolge durch Lockerung, Überlastung und Bruch auftreten. Da Implantate keine Eigenbeweglichkeit aufweisen und starr im Kieferknochen verankert sind, wird stets ein spannungsfreier Sitz von S. angestrebt. Er kann bei verschraubten S. auf mindestens zwei Pfeilern mit dem Sheffield-Test (spaltfreier Sitz bei Anziehen einer beliebigen Einzelschraube) überprüft werden. Um spannungsfreie Gerüste herzustellen, werden Verfahren zur intraoralen Verbindung (etwa Verkleben) von Teilen der S. und/oder zur digitalen Fertigung (z.B. Fräsen, Sintern) angewendet. Um unzugängliche Zementüberschüsse, die zu Periimplantitis und Implantatverlust führen können, zu vermeiden, sollte der Restaurationsrand zementierter S. stets im Bereich des Zahnfleischrands enden. Dies lässt sich – vor allem bei Implantatplattformen auf Knochenniveau ("bone level") mit entsprechenden (ggf. individuell angefertigten) Abutments erreichen. Abutments dienen als Verbindung zwischen Implantaten und S. Bei S. auf mehreren Pfeilern ermöglichen abgewinkelte Formen die Parallelisierung hin zu einer gemeinsamen Einschubrichtung. Abutments können entweder die Form eines präparierten Zahnstumpfs nachahmen oder eine Komponente eines Verbindungselements (z.B. Druckknopfsysteme, Kugelköpfe, Stege, Magnete) beinhalten. Die S. umfasst in diesen Fällen die entsprechenden ergänzenden Komponenten. |