Implants
Dental implants are synthetic structures for insertion into the bone and are normally similar in shape to the root of a tooth (cylindrical or conical). They are mainly used for intraoral anchorage of fixed or removable restorations (superstructure). In special cases they are also used for anchorage of orthodontic appliances or maxillofacial prostheses (epitheses).
Implants in the 21st century are rarely made from zirconium dioxide. In the majority of cases they are made from pure titanium. This light and stable metal is bioinert, apposition and deposition of bone is therefore possible. Rigid fixation of the implant by gap-free, bone growth on the surface, i.e. osseointegration, is vitally important for ensuring permanent stability during functional loading of implants. Suitable procedures for roughening, creating niches and increasing the surface area facilitate migration of living bone cells and ingrowth of bone into the implant surface. This also applies for the neck of the implant which, only during the very early stages of development, was finished to a smooth polished surface.
To prepare for implant placement, a narrow hole is first drilled in the bone, which is then widened incrementally using other drills (mainly in compact bone) and/ or bone condensing instruments (mainly in cancellous bone) in ascending diameter until the planned final diameter of the bone cavity is achieved. Manual or mechanical placement of the cylindrical-conical implant with external thread(s) is the same type of procedure as controlled insertion of a screw. Adequate primary stability can often be achieved by a slight press fit and self-tapping thread.
The upper edge of the implant, i.e. the platform, can be placed at bone or tissue level.
Titanium implants at bone level
Implants at tissue level
Healing may be submerged (under the densely sealed mucosa covering) or open (using intraoperative forming of a gingival collar).
There is often less bone volume available for implants due to bone resorption after tooth loss. Bone augmentation procedures are then used (e.g. GBR, guided bone regeneration) or smaller (e.g. reduced diameter) implants placed. Standard implants have a platform diameter of approx. 4 mm. The term for platform sizes that are much larger than this is "wide"; the term for much smaller platform sizes is "narrow" and even thinner implants are known as "mini-implants".
Modern dental implants are usually two-part. The implant (tooth root replacement) and abutment (core unit) have an interlocking and frictional connection. The internal conical connection with additional interlocking "tongue and groove" elements for providing rotational security has become the established design. Retention screws are tightened using defined torque to exclude the risk of movements, loosening and material overloading.
A modern implant
Though previously the fitting surface of the abutment always had the same diameter as the implant platform, modern abutments are often smaller in this region. This so-called "platform switching" is intended to improve bone preservation.
A latest generation implant
It is important to strive for as correct an anatomical emergence profile as possible to ensure the natural appearance of implant-supported restorations (red-white aesthetics) and healthy peri-implant conditions.
Von uns erhalten Sie professionelle Unterstützung.
Treten Sie mit uns in Kontakt oder nutzen Sie unser Kontaktformular.
Deutsch | Englisch |
---|---|
Alveolarkamm-Abhang | ridge slope |
Implantat-Suprakonstruktionen Implantat-Suprakonstruktionen Ober- und Unterkiefertotalprothese (Unterseite, mit Kugelkopfmatrizen)
Kugelkopf Eine S. kann rein implantatgetragen sein oder sich sowohl auf Zähnen, als auch auf Implantaten abstützen. Insbesondere bei Brücken spricht man dann von Hybrid- oder Verbund-Zahnersatz. Metallkeramikkronen auf Implantaten Bei zementierten S. ist zwischen provisorischer (temporärer), definitiver (permanenter) und semi-permanenter Zementierung zu unterscheiden. Letztere soll eine sichere Befestigung und gleichzeitig das Abnehmen der S. durch den Zahnarzt im Bedarfsfall ermöglichen. Damit handelt es sich um eine sogenannte bedingt abnehmbare (für den Patienten also festsitzende) S. Dazu gehören auch die verschraubten S. Die beiden Befestigungsarten bieten Vor- und Nachteile: Verschraubungen bedingen Spalträume, die bakteriell besiedelt werden können, zur Vorbeugung dagegen werden spezielle Gele zum Einbringen in den Implantat-Innenraum angeboten, die langfristig wirksam bleiben sollen. Erfolgt eine Fixation von S. mit Schrauben, können bei diesen auch Misserfolge durch Lockerung, Überlastung und Bruch auftreten. Da Implantate keine Eigenbeweglichkeit aufweisen und starr im Kieferknochen verankert sind, wird stets ein spannungsfreier Sitz von S. angestrebt. Er kann bei verschraubten S. auf mindestens zwei Pfeilern mit dem Sheffield-Test (spaltfreier Sitz bei Anziehen einer beliebigen Einzelschraube) überprüft werden. Um spannungsfreie Gerüste herzustellen, werden Verfahren zur intraoralen Verbindung (etwa Verkleben) von Teilen der S. und/oder zur digitalen Fertigung (z.B. Fräsen, Sintern) angewendet. Um unzugängliche Zementüberschüsse, die zu Periimplantitis und Implantatverlust führen können, zu vermeiden, sollte der Restaurationsrand zementierter S. stets im Bereich des Zahnfleischrands enden. Dies lässt sich – vor allem bei Implantatplattformen auf Knochenniveau ("bone level") mit entsprechenden (ggf. individuell angefertigten) Abutments erreichen. Abutments dienen als Verbindung zwischen Implantaten und S. Bei S. auf mehreren Pfeilern ermöglichen abgewinkelte Formen die Parallelisierung hin zu einer gemeinsamen Einschubrichtung. Abutments können entweder die Form eines präparierten Zahnstumpfs nachahmen oder eine Komponente eines Verbindungselements (z.B. Druckknopfsysteme, Kugelköpfe, Stege, Magnete) beinhalten. Die S. umfasst in diesen Fällen die entsprechenden ergänzenden Komponenten. |