Intraoral scanners
An intraoral scanner is an electronic device for taking so-called digital scans (impressions) of intraoral structures by means of contactless scanning with light rays (visible light/laser) chairside and within seconds or minutes. These devices comprise (as of 2016) a wired handpiece, for intraoral use by the dentist, connected to a computer system with monitor. A combination of a special camera unit in a known three-dimensional position to a light source uses triangulation to calculate the three-dimensional arrangement of the light reflecting surface points of the scanned structures with an accuracy of 20 µm. Each measuring field is usually only about two square centimetres in size but many images (20 to 60 mostly colour video/series images per second) can be taken and merged in quick succession.
To achieve an accurate intraoral scan, (as with every conventional impression) undercuts (possibly non-detectable optically) must be avoided, other obscured (by retraction pastes and cords) areas such as subgingival regions exposed in advance and bleeding staunched. To date, intraoral scanners cannot capture mucosal resilience (important for designing denture bases).
Some systems require additional preparation by coating the imaging area with a thin layer of powder. Implant platforms and their connector geometry are scanned indirectly by placing “scanbodies” i.e., standardised components of known dimensions and clearly aligned three-dimensionally via standardised recesses, on their top surfaces.
When preparing teeth, in real-time parameters such as amount of reduction in tooth structure, distance from opposing dentition, path of insertion and parallelisation of abutment teeth, surface morphology or contours of the preparation margin may be blown-up as required for evaluation and adjustment if necessary. In addition to teeth and/or implants for replacement or treatment, adjacent and opposing teeth as well as the bite may be scanned.
Full digital scans of a jaw may be captured in one procedure or merged one-by-one from overlapping partial images. Specific regions are easily cut out, re-scanned and blended in as often as required.
The scan data are converted into firmware data formats (such as STL), usually exportable into third-party systems, using specific software and calculated to create a virtual, three-dimensional model which can be viewed on the monitor.
The data can be supplemented and further processed with additional CAD and CAM programmes e.g., for placing virtual implants, planning and fabricating restorations, abutments, drilling templates, bite raisers or producing real models. When used with manufacturing equipment (such as milling machines), restorations such as veneers, inlays, crowns or short-span bridgework can be fabricated in a single appointment.
Intraoral scanners are an increasingly relevant alternative to taking conventional impressions with elastomeric impression materials (PVS, polyether, etc.). Less material is required, breathing is not obstructed and gagging as well as risk of aspiration no longer occur. This very first important step already provides an entry-point to digital workflow, without having to “divert” via error-prone “real” impressions and models followed by scanning them with extraoral equipment (“lab scanners”).
Von uns erhalten Sie professionelle Unterstützung.
Treten Sie mit uns in Kontakt oder nutzen Sie unser Kontaktformular.
Deutsch | Englisch |
---|---|
Parallelbohrschablone | parallel drilling template, parallel surgical stent |
Implantat-Suprakonstruktionen Implantat-Suprakonstruktionen Ober- und Unterkiefertotalprothese (Unterseite, mit Kugelkopfmatrizen)
Kugelkopf Eine S. kann rein implantatgetragen sein oder sich sowohl auf Zähnen, als auch auf Implantaten abstützen. Insbesondere bei Brücken spricht man dann von Hybrid- oder Verbund-Zahnersatz. Metallkeramikkronen auf Implantaten Bei zementierten S. ist zwischen provisorischer (temporärer), definitiver (permanenter) und semi-permanenter Zementierung zu unterscheiden. Letztere soll eine sichere Befestigung und gleichzeitig das Abnehmen der S. durch den Zahnarzt im Bedarfsfall ermöglichen. Damit handelt es sich um eine sogenannte bedingt abnehmbare (für den Patienten also festsitzende) S. Dazu gehören auch die verschraubten S. Die beiden Befestigungsarten bieten Vor- und Nachteile: Verschraubungen bedingen Spalträume, die bakteriell besiedelt werden können, zur Vorbeugung dagegen werden spezielle Gele zum Einbringen in den Implantat-Innenraum angeboten, die langfristig wirksam bleiben sollen. Erfolgt eine Fixation von S. mit Schrauben, können bei diesen auch Misserfolge durch Lockerung, Überlastung und Bruch auftreten. Da Implantate keine Eigenbeweglichkeit aufweisen und starr im Kieferknochen verankert sind, wird stets ein spannungsfreier Sitz von S. angestrebt. Er kann bei verschraubten S. auf mindestens zwei Pfeilern mit dem Sheffield-Test (spaltfreier Sitz bei Anziehen einer beliebigen Einzelschraube) überprüft werden. Um spannungsfreie Gerüste herzustellen, werden Verfahren zur intraoralen Verbindung (etwa Verkleben) von Teilen der S. und/oder zur digitalen Fertigung (z.B. Fräsen, Sintern) angewendet. Um unzugängliche Zementüberschüsse, die zu Periimplantitis und Implantatverlust führen können, zu vermeiden, sollte der Restaurationsrand zementierter S. stets im Bereich des Zahnfleischrands enden. Dies lässt sich – vor allem bei Implantatplattformen auf Knochenniveau ("bone level") mit entsprechenden (ggf. individuell angefertigten) Abutments erreichen. Abutments dienen als Verbindung zwischen Implantaten und S. Bei S. auf mehreren Pfeilern ermöglichen abgewinkelte Formen die Parallelisierung hin zu einer gemeinsamen Einschubrichtung. Abutments können entweder die Form eines präparierten Zahnstumpfs nachahmen oder eine Komponente eines Verbindungselements (z.B. Druckknopfsysteme, Kugelköpfe, Stege, Magnete) beinhalten. Die S. umfasst in diesen Fällen die entsprechenden ergänzenden Komponenten. |