Glass-fibre ribbon (Splinting of teeth/reinforcing restorations)
A glass-fibre ribbon consists of glass drawn to very thin strands (diameter 10 µm to 20 µm). The resulting glass-fibres (“long fibres” >10 mm) can simply be twisted together (cords, mats) in the same direction lying next to each other or linked as with textiles to woven fabrics or meshes to increase significantly the dimensional stability and resistance to forces from different directions.
A composite material is created by embedding the glass-fibres in a different material (matrix). Though loose glass-fibres were first used in dentistry sporadically for reinforcing in the 1970s, the use of glass-fibre ribbons has become established since the 1990s.
Glass-fibres have a decisive advantage compared with other technically used fibres (e.g. carbon fibres), as they are transparent and aesthetically inconspicuous. The glass-fibre surfaces are silanized to improve the bond with the resin matrix. They are then impregnated (wetted) with a bonder/dental adhesive. The prefabricated ribbons in standard use today in the dental sector are divided into non-preimpregnated and preimpregnated (so-called prepregs).
Glass-fibre ribbons are used in different disciplines in dentistry with or without prepreparation of the tooth structure, e.g. in:
The glass-fibre ribbons must be handled with great care using metal instruments to avoid contamination of the bond surface with subsequent failure of the adhesive. Protected storage prevents drying out, material ageing or premature polymerisation. Application from a light-protected bottle greatly facilitates dispensing and significantly increases the shelf-life.
Many dental materials exhibit high compressive strength. Glass-fibres mainly improve the tensile strength and are, therefore, most effective when placed in tensile zones. Mechanical properties of the bond are influenced by various factors: the proportion of fibre and matrix should be in the region of 50% each to utilise the advantages of the glass-fibre and avoid cohesive fractures within excessively thick composite regions. Pre-impregnated ribbons are already manufactured in this manner. They should be placed close to the tooth (with splinting, collar-shaped in the interdental space) and fill the framework to be fabricated as completely as possible.
After a splint or restoration is finished, the glass-fibres should always be covered thinly but completely by composite (to prevent chipping and swelling due to water intake). Generally, flowable, low-filled composite materials (flowables) are applied using the brush technique for covering the fibres.
Von uns erhalten Sie professionelle Unterstützung.
Treten Sie mit uns in Kontakt oder nutzen Sie unser Kontaktformular.
Deutsch | Englisch |
---|---|
Parallelbohrschablone | parallel drilling template, parallel surgical stent |
Implantat-Suprakonstruktionen Implantat-Suprakonstruktionen Ober- und Unterkiefertotalprothese (Unterseite, mit Kugelkopfmatrizen)
Kugelkopf Eine S. kann rein implantatgetragen sein oder sich sowohl auf Zähnen, als auch auf Implantaten abstützen. Insbesondere bei Brücken spricht man dann von Hybrid- oder Verbund-Zahnersatz. Metallkeramikkronen auf Implantaten Bei zementierten S. ist zwischen provisorischer (temporärer), definitiver (permanenter) und semi-permanenter Zementierung zu unterscheiden. Letztere soll eine sichere Befestigung und gleichzeitig das Abnehmen der S. durch den Zahnarzt im Bedarfsfall ermöglichen. Damit handelt es sich um eine sogenannte bedingt abnehmbare (für den Patienten also festsitzende) S. Dazu gehören auch die verschraubten S. Die beiden Befestigungsarten bieten Vor- und Nachteile: Verschraubungen bedingen Spalträume, die bakteriell besiedelt werden können, zur Vorbeugung dagegen werden spezielle Gele zum Einbringen in den Implantat-Innenraum angeboten, die langfristig wirksam bleiben sollen. Erfolgt eine Fixation von S. mit Schrauben, können bei diesen auch Misserfolge durch Lockerung, Überlastung und Bruch auftreten. Da Implantate keine Eigenbeweglichkeit aufweisen und starr im Kieferknochen verankert sind, wird stets ein spannungsfreier Sitz von S. angestrebt. Er kann bei verschraubten S. auf mindestens zwei Pfeilern mit dem Sheffield-Test (spaltfreier Sitz bei Anziehen einer beliebigen Einzelschraube) überprüft werden. Um spannungsfreie Gerüste herzustellen, werden Verfahren zur intraoralen Verbindung (etwa Verkleben) von Teilen der S. und/oder zur digitalen Fertigung (z.B. Fräsen, Sintern) angewendet. Um unzugängliche Zementüberschüsse, die zu Periimplantitis und Implantatverlust führen können, zu vermeiden, sollte der Restaurationsrand zementierter S. stets im Bereich des Zahnfleischrands enden. Dies lässt sich – vor allem bei Implantatplattformen auf Knochenniveau ("bone level") mit entsprechenden (ggf. individuell angefertigten) Abutments erreichen. Abutments dienen als Verbindung zwischen Implantaten und S. Bei S. auf mehreren Pfeilern ermöglichen abgewinkelte Formen die Parallelisierung hin zu einer gemeinsamen Einschubrichtung. Abutments können entweder die Form eines präparierten Zahnstumpfs nachahmen oder eine Komponente eines Verbindungselements (z.B. Druckknopfsysteme, Kugelköpfe, Stege, Magnete) beinhalten. Die S. umfasst in diesen Fällen die entsprechenden ergänzenden Komponenten. |