Dental Polishers
In dentistry and dental technology very different materials require smoothing and polishing. This ranges from exceptionally hard natural tooth enamel to the surfaces of filling materials (composites, compomers or amalgam), fixed restorations (metal alloys or ceramics), implant components (titanium, other metals or zirconia), appliances, splints or dentures (all types of hard and soft materials).
The dental polishers used in standard handpieces are rotary instruments with a metal or plastic shank. The smoothing and polishing section of the instrument is attached to the shank – whether rigidly connected or via press-on, clamp or screw connection (e.g. with mandrels). Some polishers are not active themselves and require the additional use of polishing pastes as consumable materials (in particular for prophylaxis).
Easy, clean results are produced with all other polishers. In this case the working section is made of rubber or silicone. Abrasive materials (e.g., silicon carbide or corundum and mainly diamonds are used for very hard materials, in particular ceramics) of a suitable, selected grit size are embedded in the surface or impregnate the entire working section.
A wide range of polisher shapes is available for different applications. Typical shapes are points, cups and discs for the dental practice and wheels, cylinders/arbor bands and torpedoes for the dental laboratory.
A dental polisher
Surfaces of materials are smoothed and polished in one or more working stages. Technically, the individual processing stages vary either in the different pressure applied and/or motor speed but mainly by using abrasives/polishers with different degrees of hardness and grit sizes (specific for each stage). Polishing techniques often differentiate between two-step pre-polishing (coarse polish) and high-lustre polishing (fine polish), depending on the material, initial condition, required final state and up to three steps. The first/coarsest step is frequently a transition from preparing/contouring; at this stage significant (macroscopic) amounts of material are still removed. In the subsequent steps the main focus of the work is more on reducing (increasingly microscopic) surface irregularities (surface roughness). The final step produces a smooth surface, in general with a silky sheen or high-lustre/shining finish. Often the different colours of the polishers facilitate the assignment of specific instruments to the respective working stages. All diamond grit polishers have uniformly standardised coloured rings for identifying the different fineness of each polishing step.
To rule out cross contamination between patients in clinical dental medical applications, preference should be given to polishers, which are either suitable for sterilisation in an autoclave to ensure safe multiple use or which are designed as single-use products from the outset (use for one single patient only).
Von uns erhalten Sie professionelle Unterstützung.
Treten Sie mit uns in Kontakt oder nutzen Sie unser Kontaktformular.
Deutsch | Englisch |
---|---|
Parallelbohrschablone | parallel drilling template, parallel surgical stent |
Implantat-Suprakonstruktionen Implantat-Suprakonstruktionen Ober- und Unterkiefertotalprothese (Unterseite, mit Kugelkopfmatrizen)
Kugelkopf Eine S. kann rein implantatgetragen sein oder sich sowohl auf Zähnen, als auch auf Implantaten abstützen. Insbesondere bei Brücken spricht man dann von Hybrid- oder Verbund-Zahnersatz. Metallkeramikkronen auf Implantaten Bei zementierten S. ist zwischen provisorischer (temporärer), definitiver (permanenter) und semi-permanenter Zementierung zu unterscheiden. Letztere soll eine sichere Befestigung und gleichzeitig das Abnehmen der S. durch den Zahnarzt im Bedarfsfall ermöglichen. Damit handelt es sich um eine sogenannte bedingt abnehmbare (für den Patienten also festsitzende) S. Dazu gehören auch die verschraubten S. Die beiden Befestigungsarten bieten Vor- und Nachteile: Verschraubungen bedingen Spalträume, die bakteriell besiedelt werden können, zur Vorbeugung dagegen werden spezielle Gele zum Einbringen in den Implantat-Innenraum angeboten, die langfristig wirksam bleiben sollen. Erfolgt eine Fixation von S. mit Schrauben, können bei diesen auch Misserfolge durch Lockerung, Überlastung und Bruch auftreten. Da Implantate keine Eigenbeweglichkeit aufweisen und starr im Kieferknochen verankert sind, wird stets ein spannungsfreier Sitz von S. angestrebt. Er kann bei verschraubten S. auf mindestens zwei Pfeilern mit dem Sheffield-Test (spaltfreier Sitz bei Anziehen einer beliebigen Einzelschraube) überprüft werden. Um spannungsfreie Gerüste herzustellen, werden Verfahren zur intraoralen Verbindung (etwa Verkleben) von Teilen der S. und/oder zur digitalen Fertigung (z.B. Fräsen, Sintern) angewendet. Um unzugängliche Zementüberschüsse, die zu Periimplantitis und Implantatverlust führen können, zu vermeiden, sollte der Restaurationsrand zementierter S. stets im Bereich des Zahnfleischrands enden. Dies lässt sich – vor allem bei Implantatplattformen auf Knochenniveau ("bone level") mit entsprechenden (ggf. individuell angefertigten) Abutments erreichen. Abutments dienen als Verbindung zwischen Implantaten und S. Bei S. auf mehreren Pfeilern ermöglichen abgewinkelte Formen die Parallelisierung hin zu einer gemeinsamen Einschubrichtung. Abutments können entweder die Form eines präparierten Zahnstumpfs nachahmen oder eine Komponente eines Verbindungselements (z.B. Druckknopfsysteme, Kugelköpfe, Stege, Magnete) beinhalten. Die S. umfasst in diesen Fällen die entsprechenden ergänzenden Komponenten. |